BJ Fluid Power

Dual pilot check valves have two checks valves that each allow flow to pass in one direction, with a low pressure drop, and then prevent reverse flow until pilot pressure is applied via the pressure port of the second check valve. ... These valves use two check cartridges in a housing containing a pusher.

Dual Pilot Operated Check Valves used in load holding applications in Hydraulic cylinder and hydraulic motors.
Dual Pilot Check Valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.

Owing to the wide experience in this domain, we are instrumental in offering Hydraulic Cartridge Check Valve, 1/4 inch to our clients.

Dual Pilot Check Valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.

Dual Pilot Check Valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.

Single Pilot Operated Check Valves are used to allow flow in one direction while blocking flow in the opposite direction. The valve remains closed in the reverse direction until pilot pressure is applied, which then allows flow in the reverse direction.

Single Pilot Operated Check Valves are used to allow flow in one direction while blocking flow in the opposite direction. The valve remains closed in the reverse direction until pilot pressure is applied, which then allows flow in the reverse direction.

Thanks to the VRDE3801 Dual Pilot Operated Check Valve it is possible to manage the support and movement of a suspended load in both directions of actuation. The typical use for this type of valve is in the presence of double-acting cylinders that you want to lock in the working or resting position. The hydraulic seal is guaranteed by a hardened and ground tapered poppet. Thanks to the pilot ratio, the release pressure is lower than that induced by the suspended load. VRDE valves are available with BSPP-GAS threaded ports. Depending on the chosen size, they can work with operating pressures up to 350 bar and 35 LPM flow rate.

Dual Pilot Check Valves are used to block the cylinder in both directions.Flow is free in one direction and blocked in the reverse direction untilpilot pressure is applied.

Direct Mount Vent Valve releases excess pressure directly at the mounting point to prevent overpressure and ensure system safety.